How to Avoid These 5 Frequent Floor Sanding Errors

A good floor is essential for any home. It's the first thing that people notice when they come in, and it's also the last thing they see before they leave. This makes it very important to make sure that your floors are in tip-top shape. When it comes to Floor Sanding Adelaide, there are a lot of things that can go wrong. But don't worry! This guide lets you know exactly what to look out for and how to avoid these common mistakes.

1. Improper grit sequence

The sequence of Floor Sanding Adelaide grits is important. You must use the right grit for the job. If you are trying to remove scratches and gouges, then coarse sandpaper is needed. But a fine grit will do the trick if you are just trying to give it a smooth finish.

The most common mistake people make when choosing their sandpaper grits is using too much finesse in their final step.

This can cause them to end up with an uneven surface that requires repainting or re-staining in order for its defects not to show through after having worked so hard on removing all those other imperfections!

So don't make this mistake—make sure your final step matches its purpose properly!

2. Too many passes over the same area

The most common mistake made by DIYers is sanding with too much pressure. This can lead to swirl marks, which will only make your floor look worse. When sanding, it is important to gently move the sander across the floor without applying too much pressure. If you find yourself applying excess pressure, it's likely that you are using a coarser grit than necessary and should switch down to a lower grit number (such as 80 grit instead of 100).

You should also allow each layer of sandpaper to dry before moving on to another layer or sanding in another direction. If you don't allow each layer time to dry before proceeding with subsequent coats of finish or stain, you'll remove some of those previous coats—which might lead users to think they need more coats than necessary!

3. Wrong sanding machine for the job

• Don't use a belt sander on the hardwood.
  
  
• Don't use a random orbital sander on softwood.
  
  
• Don't use a drum sander on the hardwood.
  
  
• Don't use a disc sander on softwood.
  
  
• And finally, don't use your palm sander anywhere near wood that needs to look good when you're done with it!

4. Not using the proper amount of pressure.

If you're using an orbital sander, always keep the same amount of pressure on the pad. This may mean you have to take breaks between passes, so the pad doesn't heat up and warp.

If you don't do this, too much pressure will cause gouges in your floors—and if there is a lot of dust built up on your floor right now (which happens when sanding), then it can be difficult for your machine to remove all of these marks without tearing into your wood as well!

If you are using a drum or belt sander and not an orbital sander, keep in mind that these tools require more pressure than an orbital sander because they have wider belts.

You might need Floor Sanding Adelaide experts to hold on to the tool while you apply maximum force with both hands—this will give them some stability when trying to remove the old finish without removing too much wood it!

5. Not hiring professional

When it comes to Floor Sanding Adelaide, you want to hire a professional. The reason is simple: they have the right equipment and experience. The wrong choice can lead to mistakes that cost you both time and money.

Here are some reasons why hiring a professional floor sanding company is worth it:

• They know what they're doing. A professional has years of practice using the right tools for the job. They know how much material needs to be used where, which angles work best for different areas of your home (such as high traffic), how long it takes for certain jobs, etc., which means you can rest assured knowing your project will be done properly without guesswork on your part!
  
  
• The job gets done faster than if done by hand. This means less downtime during construction - fewer days spent without furniture in rooms being worked on or having guests over because half their house isn't finished yet! When working with professionals, they use specialized machines that help speed up preparation stages like removing old paint before starting work on new surfaces like floors so there won't be any delays due to waiting around while someone else does theirs first either."

Conclusion

So, now that you know what mistakes to avoid and how to do it, go out and give your old floor a new life. And don't forget: when in doubt, hire a professional!